(1/4) 001-03 / 20061012 / e93_uf.fm ? all specifications are subject to change without notice. common mode choke coils(line filters) for ac power supply compact and separable bobbin type uf series tdk common mode choke coils(line filters) are used in a wide range of prevention of electromagnetic interference(emi) and radio frequency interference(rfi) from power supply lines and for pre- vention of multifunctioning of products such as measuring equip- ment and system equipment. features wide range of selection. high impedance at applicable frequency. high self-resonant frequency. product identification (1) core shape uf: u-type core (2) dimensional code length height (3) external shape code v: vertical type h: horizontal type (4) high material (5) inductance value y example) 133:13mh (6) rated current value example) 3r0:3.0a (7) product management number selection chart ? handling power=(inductance value) (current) 2 . it is possible to design within the range below this value. [example] the coil for 2a can make even the inductance of 2.5mh or less a product for handling power 10. conformity to rohs directive uf v - ayr - 01 (1) (2) (3) (4) (5) (6) (7) series configuration type inductance value min. rated current (a) handling power ? l i 2 (mh a 2 ) weight (g)typ. minimum package quantity (pieces/box) uf two sections bobbin types uf1717v 0.2 to 10mh 0.25 to 1.6 0.6 3.5 640 uf1717h 0.2 to 10mh 0.25 to 1.6 0.6 3.5 480 two sections bobbin types (for high frequency) uf1717v 10 to 60h 1 to 3 0.08 3 640 uf1815sg 50 to 350h 1 to 5 1.2 4.6 1280 conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/4) 001-03 / 20061012 / e93_uf.fm all specifications are subject to change without notice. two sections bobbin type uf series features this series is compact in size due to its use of high permeability ferrite core. uf1717v/uf1717h(2 separable bobbin) types shapes and dimensions/circuit diagra m typical electrical characteristics impedance vs. frequency characteristics electrical characteristics (standard line up) measuring equipment of inductance value: lcr meter(hp4261a, hp4263b or equivalent)[f=1khz] packaging quantities y ratings ? 1 pb free solder(sn-3ag-0.5cu) ? 2 however, this product is not recognized by each regulations. l 2 4 3 l 1 1 2 weight: 3.5g typ. recommended hole diameter: ?0.9 to 1.0 dimensions in mm 14 23 11max. 17max. ?0.6 4 1 8 0.5 7 0.5 17.5max. 1 4 23 15.5max. 12.5max. ?0.6 4 1 8 0.5 7 0.5 17.5max. ( 6 ) 100 1000 10 1 0.1 0.01 0.01 0.1 1 10 100 impedance ( k ? ) frequency ( mhz ) 201y1r6 601y1r0 132y0r7 282y0r5 103yr25 part no. inductance (mh)min. dc resistance ( ? )max. rated current iac(a)max. UF1717V-103YR25-02 10 3.5 0.25 uf1717v-702y0r3-01 7 2.5 0.3 uf1717v-342y0r4-01 3.4 1.3 0.4 uf1717v-282y0r5-01 2.8 1 0.5 uf1717v-152y0r6-01 1.5 0.55 0.6 uf1717v-132y0r7-01 1.3 0.5 0.7 uf1717v-601y1r0-01 0.6 0.2 1 uf1717v-201y1r6-01 0.2 0.1 1.6 uf1717h-103yr25-01 10 3.5 0.25 uf1717h-702y0r3-01 7 2.5 0.3 uf1717h-342y0r4-01 3.4 1.3 0.4 uf1717h-282y0r5-01 2.8 1 0.5 uf1717h-152y0r6-01 1.5 0.55 0.6 uf1717h-132y0r7-01 1.3 0.5 0.7 uf1717h-601y1r0-01 0.6 0.2 1 uf1717h-201y1r6-01 0.2 0.1 1.6 uf1717v 640pieces/box uf1717h 480pieces/box item standard value conditions rated voltage(v) 80 to 280 50hz/60hz dielectric withstanding voltage(v) 2000 between each winding for 1 minute insulation resistance (m ? ) 100min. between each winding for dc.500v temperature rise(c) 45max. with line resistance operating temperature range(c) ?20 to +120 including self-temperature rise storage temperature range(c) ?20 to +85 resistance to soldering tenperature ? 1 2605c, 101sec solder bath method 3505c, 5sec max. soldering iron method applicable safety standard ? 2 electrical appliance and material safety law ("denan"), iec60065, ul6500, csa c22.2
(3/4) 001-03 / 20061012 / e93_uf.fm all specifications are subject to change without notice. two sections bobbin type(for high frequency) uf series features this series is designed to reduce stray capacity between windings by using a single-layer coil construction on ni-zn ferrite cores, which offer excellent high frequency characteristics. this series provides excellent noise suppression for high frequency ranges including the fm band. since the windings are divided into two sections, this filter can also be used as a signal line with excellent withstanding voltage. uf1717v(2 separable bobbin for high frequency) type shapes and dimensions/circuit diagram typical electrical characteristics impedance vs. frequency characteristics electrical characteristics (standard line up) measuring equipment of inductance value: lcr meter(hp4261a, hp4263b or equivalent)[f=1khz] packaging quantities y ratings ? 1 pb free solder(sn-3ag-0.5cu) ? 2 however, this product is not recognized by each regulations. weight: 3g typ. recommended hole diameter: ?0.9 dimensions in mm 14 23 11max. 17max. ?0.6 4 1 8 0.5 7 0.5 17.5max. l2 4 3 l1 1 2 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 impedance ( k ? ) frequency ( mhz ) 100y3r0 200y2r0 300y1r2 600y1r0 part no. inductance (h)min. dc resistance (m ? )max. rated current iac(a)max. uf1717v-600y1r0-03 60 300 1 uf1717v-300y1r2-03 30 150 1.2 uf1717v-200y2r0-03 20 100 2 uf1717v-100y3r0-03 10 50 3 uf1717v 640pieces/box item standard value conditions rated voltage(v) 80 to 280 50hz/60hz dielectric withstanding voltage(v) 2000 between each winding for 1 minute insulation resistance (m ? ) 100min. between each winding for dc.500v temperature rise(c) 45max. with line resistance operating temperature range(c) ?20 to +120 including self-temperature rise storage temperature range(c) ?20 to +85 resistance to soldering tenperature ? 1 2605c, 101sec solder bath method 3505c, 5sec max. soldering iron method applicable safety standard ? 2 electrical appliance and material safety law ("denan"), iec60065, ul6500, csa c22.2
(4/4) 001-03 / 20061012 / e93_uf.fm all specifications are subject to change without notice. two sections bobbin type(for high frequency) uf series features this series uses a mn-zn ferrite core and yet it offers excellent noise suppression into the high frequencies due to its low distributed inductance construction based on a single layer winding. this compact filters's inductance has been improved by as much as 50% compared to exsting products of compareble size while its hight profile has been reduced by approximately 30%. uf1815sg(2 separabl e bobbin for high frequency) type shapes and dimensions/circuit diagram typical electrical characteristics impedance vs. frequency characteristics electrical characteristics (standard line up) measuring equipment of inductance value: lcr meter(hp4261a, hp4263b or equivalent)[f=1khz] packaging quantities ratings ? 1 pb free solder(sn-3ag-0.5cu) ? 2 however, this product is not recognized by each regulations. 18max. 17max. 13 0.5 10 0.5 ?0.7 15.5max. 3.5 0.5 l 1 l 2 1 2 4 3 weight: 4.6g typ. recommended hole diameter: ?1.0 to 1.1 dimensions in mm 14 23 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 impedance ( k ? ) frequency ( mhz ) 500y5r0 650y4r0 800y3r0 151y2r2 181y1r6 281y1r2 351y1r0 part no. inductance (h)min. dc resistance (m ? )max. rated current iac(a)max. uf1815sg-351y1r0-01 350 300 1 uf1815sg-281y1r2-01 280 250 1.2 uf1815sg-181y1r6-01 180 130 1.6 uf1815sg-151y2r2-01 150 100 2.2 uf1815sg-800y3r0-01 80 50 3 uf1815sg-650y4r0-01 65 30 4 uf1815sg-500y5r0-01 50 25 5 uf1815sg 1280pieces/box item standard value conditions rated voltage(v) 80 to 280 50hz/60hz dielectric withstanding voltage(v) 2000 between each winding for 1 minute insulation resistance (m ? ) 100min. between each winding for dc.500v temperature rise(c) 45max. with line resistance operating temperature range(c) ?20 to +120 including self-temperature rise storage temperature range(c) ?20 to +85 resistance to soldering tenperature ? 1 2605c, 101sec solder bath method 3505c, 5sec max. soldering iron method applicable safety standard ? 2 electrical appliance and material safety law ("denan"), iec60065, ul6500, csa c22.2
|
